De acuerdo a pruebas realizadas en equipo Router Cisco C899G-LTE-LA-K9 con módulos de fibra (SFP) no propietarios, se efectuaron pruebas con el siguiente módulo SFP Raisecom USFP-Gb/SS134-D-R 1.26G.
En una primera instancia sin ningún tipo de configuración en el equipo este módulo no es reconocido directamente;
*Apr 26 12:19:58.007: %GBIC_SECURITY_CRYPT-4-VN_DATA_CRC_ERROR: GBIC in port 1 has bad crc
*Apr 26 12:19:58.007: %MAINBOARD_SFP-6-INSERTED: Transceiver module unapproved SFP is inserted in GigabitEthernet8 port.
*Apr 26 12:19:58.007: %MAINBOARD_SFP-4-NON_CISCO_SFP: Unsupported SFP transceiver module found on board.
Por lo tanto, para que pueda ser aceptado se requiere habilitar el siguiente comando el equipo Cisco.
Router(config)#service unsupported-transceiver
Warning: When Cisco determines that a fault or defect can be traced to
the use of third-party transceivers installed by a customer or reseller,
then, at Cisco's discretion, Cisco may withhold support under warranty or
a Cisco support program. In the course of providing support for a Cisco
networking product Cisco may require that the end user install Cisco
transceivers if Cisco determines that removing third-party parts will
assist Cisco in diagnosing the cause of a support issue.
*Apr 26 12:23:16.007: %GBIC_SECURITY_CRYPT-4-VN_DATA_CRC_ERROR: GBIC in port 1 has bad crc
*Apr 26 12:23:16.007: %MAINBOARD_SFP-6-INSERTED: Transceiver module unknown SFP is inserted in GigabitEthernet8 port.
Hola gufuent, sabes si los nuevos switch Cisco CBS 350 traen el comando "service unsupported-transceiver " en su psuedo IOS?
ResponderBorrar