Instalación de Cisco Prime Infrastructure

Paso 1: Cuando se enciende por primera vez el Cisco Prime es necesario ingresar setup para comenzar a configurar el dispositivo.

**********************************************

Please type 'setup' to configure the appliance

**********************************************

Server login: setup

Paso 2: A continuación se procederá a configurar cada uno los datos solicitados en el equipo.

Enter hostname []: Prime-Sup

Enter IP address[]: 192.168.124.40

Enter IP default netmask[]: 255.255.255.0

Enter IP default gateway[]: 192.168.124.1

Enter default DNS domain[]: support.com

Enter primary nameserver[]: 192.168.23.51

Add/Edit another nameserver? Y/N : N

Enter primary NTP server[time.nist.gov]: ntp.shoa.cl

Add/Edit secondary NTP server? Y/N : N

Enter system timezone[UTC]: US/Pacific

Enter username[admin]: admin

Enter password: supp01.admin

Enter password again: supp01.admin

Bringing up network interface...

Pinging the gateway...

Pinging the primary nameserver...

Do not use 'Ctrl-C' from this point on...

Appliance is configured

Installing applications...

Installing NCS ...

************************************************

* Cisco Prime Network Control System Setup *

************************************************

Enter "^" to return to previous question.

********************************************

* High Availability Role Selection *

********************************************

Will this server be used as a Secondary for HA? (yes/no): no

********************************************

* Web Interface Root Password Selection *

********************************************

Enter root password: supp01.root

Enter root password again: supp01.root

********************************************

* FTP Password Selection *

********************************************

Enter ftp password: supp01.ftp

Enter ftp password again: supp01.ftp

************************************************

* Summary *

************************************************

Server will not be a Secondary

Root Password is set.

Ftp Password is set.

Apply these settings? (y/n)y

Paso 3: Una vez reiniciado el Cisco Prime podemos ingresar las credenciales para entrar al dispositivo y verificar que se encuentra con todos sus servicios activos.

Prime-Sop login: admin

Password: supp01.admin

Prime-Sup/admin# ncs status

Health Monitor is running.

 Ftp Server is running

 Database server is running

 Tftp Server is running

 Matlab Server is running

 NMS Server is running.

 Plug and Play Gateway is running.

 SAM Daemon is running ...

 DA Daemon is running ...

 Syslog Daemon is running ..

Paso 4: Encontrándose con todos sus servicios habilitados podemos ingresar a través de interfaz gráfica (GUI)

https://prime-ipaddress.

https://192.168.124.40