Actualización de Software de WLC vía CLI - WLC Cisco

WLC Se puede actualizar software mediante;

GUI

CLI

WCS

A continuación se detalla el procedimiento para realizar la actualización de software del WLC Cisco a través de CLI, se debe tener en consideración que el WLC debe alcanzar al servidor TFTP que contendrá el nuevo sistema operativo del equipo.

(Cisco Controller) >transfer download mode tftp

(Cisco Controller) >transfer download serverip 192.168.124.38

(Cisco Controller) >transfer download path .

(Cisco Controller) >transfer download filename AIR-CT5500-K9-7-2-111-3.aes

(Cisco Controller) >transfer download start

Mode............................................. TFTP

Data Type........................................ Code

TFTP Server IP................................... 192.168.124.38

TFTP Packet Timeout.............................. 6

TFTP Max Retries................................. 10

TFTP Path........................................ ./

TFTP Filename.................................... AIR-CT5500-K9-7-2-111-3.aes

This may take some time.

Are you sure you want to start? (y/N) y

TFTP Code transfer starting.

TFTP receive complete... extracting components.

Writing new RTOS to flash disk.

Writing new FP to flash disk.

Writing new APIB to flash disk.

Executing install_apib script.

Executing fini script.

TFTP File transfer is successful.

Reboot the controller for update to complete.

                                                                                 Optionally, pre-download the image to APs before rebooting to reduce network downtime.

(Cisco Controller) reset system