Switch#show version | include image
System
image file is "flash:/c3560e-universalk9-mz.122-55.SE12.bin"
Instalacion de nueva IOS
Switch#dir usbflash0:
Directory
of usbflash0:/
1 -rw- 2489592 Dec 26 2014 16:14:14 +00:00 NetacEncryptionKey.exe
2 -rw- 26945536 May 8 2018 11:14:40
+00:00 c3560e-universalk9-mz.152-4.E6.bin
Switch#copy usbflash0:c3560e-universalk9-mz.152-4.E6.bin flash:
Destination
filename [c3560e-universalk9-mz.152-4.E6.bin]?
Copy
in Progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
26945536
bytes copied in 50.212 secs
Switch#dir flash:
Directory
of flash:/
2 -rwx 26945536 Mar 1 1993 00:31:03 +00:00 c3560e-universalk9-mz.152-4.E6.bin
3 -rwx 14569322 Mar 1 1993 00:06:29
+00:00 c3560e-universalk9-mz.122-55.SE12.bin
4 -rwx 1932 Jan 2 2006
00:02:04 +00:00 config.text
5 -rwx 1917 Jan 2 2006
00:02:04 +00:00 private-config.text
6 -rwx 3096 Jan 2 2006
00:02:04 +00:00 multiple-fs
Switch(config)#boot system flash:c3560e-universalk9-mz.152-4.E6.bin
Una vez reiniciado el equipo, se presenta incompatibilidad de versión de software del módulo con la versión de IOS del switch.
*Jan 2 00:04:37.293: %PLATFORM_SM10G-3-SW_VERSION_MISMATCH: The FRULink 10G Service Module (C3KX-SM-10G) in switch 1 has a
software version that is incompatible with the IOS software version. Please update the software. Module is in pass-thru mode.
Switch#show inventory
NAME:
"1", DESCR: "WS-C3560X-24"
PID:
WS-C3560X-24T-S , VID: V02 , SN: FDO15123456
NAME: "Power Supply 2", DESCR: "FRU Power Supply"
PID:
C3KX-PWR-350WAC , VID: V02L , SN: LIT15123456
NAME: "FRULink Slot 1 - FRULink Module", DESCR: "FRULink 10G SM Module"
PID:
C3KX-SM-10G , VID: V02 , SN: FDO18123456
NAME: "TenGigabitEthernet1/1", DESCR: "SFP-10GBase-SR"
PID:
SFP-10G-SR , VID: V03 , SN:
AVD20123456
NAME: "TenGigabitEthernet1/2", DESCR: "SFP-10GBase-SR"
PID:
SFP-10G-SR , VID: V03 , SN:
FNS20123456
Switch#sh switch service-modules
Switch/Stack
supports service module CPU version: 03.08.06.WAL
Temperature
CPU
Switch#
H/W Status (CPU/FPGA) CPU
Link Version
-----------------------------------------------------------------
1
OK
60C/68C ver-mismatch
03.00.41
Debido a esta incompatibilidad fue necesario la actualización del software del módulo, para que finalmente sea reconocido sin problemas.
Switch#archive download-sw /overwrite /reload usbflash0:c3kx-sm10g-tar.152-4.E6.tar
examining
image...
extracting
info (99 bytes)
extracting
c3kx-sm10g-mz.152-4.E6/info (500 bytes)
extracting
info (99 bytes)
System Type: 0x00010002
Ios Image File Size: 0x017BDA00
Total Image File Size: 0x017BDA00
Minimum Dram required: 0x08000000
Image Suffix: sm10g-152-4.E6
Image Directory: c3kx-sm10g-mz.152-4.E6
Image Name: c3kx-sm10g-mz.152-4.E6.bin
Image Feature: IP|LAYER_3|MIN_DRAM_MEG=128
FRU Module Version: 03.08.06.WAL
Updating FRU Module on switch 1...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Updating
FRU FPGA image...
FPGA image update complete.
All software images installed.
Requested
system reload in progress...
(reinicio de equipo)
*Jan 2 00:02:28.016: %PLATFORM-6-FRULINK_INSERTED: FRULink 10G SM module inserted.
*Jan
2 00:02:28.906: %PHY-5-TRANSCEIVERINSERTED: Slot=1 Port=30: Transceiver has
been inserted
*Jan
2 00:02:29.166: %PHY-5-TRANSCEIVERINSERTED: Slot=1 Port=29: Transceiver has
been inserted
Switch>
Switch>
*Jan
2 00:04:45.137: %PLATFORM_SM10G-6-LINK_UP: The FRULink 10G Service Module
(C3KX-SM-10G) communication has been
established.
Switch>sh
switch service-modules
Switch/Stack
supports service module CPU version: 03.08.06.WAL
Temperature
CPU
Switch#
H/W Status (CPU/FPGA) CPU
Link Version
-----------------------------------------------------------------
1
OK
67C/70C connected
03.08.06.
